Shear wave sensitivity test block - test block - ultrasonic test block - flaw detection test block

The national standard GB/T 11345-2013 "Ultrasonic testing technology, testing grade and evaluation of weld non-destructive testing", according to the standard content requirements, the test blocks are divided into five categories, a total of 28 pieces. (φ3mm transverse hole sensitivity test block, longitudinal wave sensitivity test block, transverse wave sensitivity test block, trough reference sensitivity test block, serial type test block.)

National standard GB/T 11345-2013 "Ultrasonic testing technology, testing grade and evaluation of non-destructive testing of Welds", GB/T 29711-2013 "Display characteristics of ultrasonic testing of welds in non-destructive testing", GB/T 29712-2013 "Ultrasonic testing acceptance of welds in non-destructive testing", etc It was promulgated on September 18, 2013 and implemented on June 1, 2014. This series of standards is a recommended standard, corresponding to the technical method and test grade of ultrasonic welding seam testing, display feature determination and weld quality acceptance of three aspects, instead of GB/T 11345-1989 standard. The standard clearly gives the requirements for setting reference sensitivity, but no standard test block drawings are given, so various industries need to design a variety of test blocks according to the standard according to the use of different, for the standard test block design, drawing the advantages of industry design and finally designing a complete set of standard test blocks. This set of test blocks is a patented product, this manual is for reference only, please do not use for any commercial activities.


According to the standard content requirements, the test blocks are divided into five categories, with a total of 28 pieces. (φ3mm transverse hole sensitivity test block, longitudinal wave sensitivity test block, transverse wave sensitivity test block, trough reference sensitivity test block, serial type test block.)


Shear wave sensitivity test block

This kind of test block is designed according to the requirements of technology 2 in standard technology 2. This kind of test block is mainly used to make longitudinal wave range-gain-dimension curve (DGS) by using flat bottom hole as the reference reflector in standard technology 2. Four series of 12 test blocks are designed according to the different detection range, the diameter of the flat bottom hole and the Angle of the probe used.

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块

山东瑞祥模具有限公司|试块


规格

序号

试块代号

试块名称

标准反射体(mm)

检测范围(mm)

1

SD-1

φ3mm横孔试块

φ3×40横孔

8≤t≤15

2

SD-2

φ3mm横孔试块

φ3×40横孔

15<t≤20

3

SD-3

φ3mm横孔试块

φ3×40横孔

20<t≤40

4

SD-4

φ3mm横孔试块

φ3×40横孔

40<t≤100

5

SD-5

φ3mm横孔试块

φ3×40横孔

t>100


φ3mm横孔试块SD-1
φ3mm横孔试块SD-2
φ3mm横孔试块SD-3
φ3mm横孔试块SD-4
φ3mm横孔试块SD-5
≤40mm纵波灵敏度试块1#ZL-Ia
≤40mm纵波灵敏度试块2#ZL-Ib
≤40mm纵波灵敏度试块3#ZL-Ic
≤40mm纵波灵敏度试块4#ZL-Id
≤40mm纵波灵敏度试块5#ZL-Ie
≥40mm纵波灵敏度试块1#ZL-IIa
≥40mm纵波灵敏度试块2#ZL-IIb
≥40mm纵波灵敏度试块3#ZL-IIc
≥40mm纵波灵敏度试块4#ZL-IId
横波灵敏度试块H45-45-Φ1.5HL-Ia
横波灵敏度试块H45-60-Φ1.5HL-Ib
横波灵敏度试块H45-70-Φ1.5HL-Ic
横波灵敏度试块H100-45-Φ2HL-IIa
横波灵敏度试块H100-60-Φ2HL-IIb
横波灵敏度试块H100-70-Φ2HL-IIc
横波灵敏度试块H100-45-Φ2.5HL-IIIa
横波灵敏度试块H100-60-Φ2.5HL-IIIb
横波灵敏度试块H100-70-Φ2.5HL-IIIc
横波灵敏度试块H125-45-Φ3HL-IVa
横波灵敏度试块H125-60-Φ3HL-IVb
横波灵敏度试块H125-70-Φ3HL-IVc
槽型基准灵敏度试块CX-I
串列式试块T=30mmCL-I
串列式试块T=80mmCL-II
串列式试块T=120mmCL-III



Ruixiang brand test block | mould

内包装橙色工程塑料

Ruixiang brand test block | mould

外包装(纸箱)


Online purchase:www.ndtmall.cn

电话咨询
邮件咨询
在线地图
QQ客服